GTO V8-6.0L VIN U (2005)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Caution: Refer to Battery Disconnect Caution Service Precautions.
Disconnect the negative battery cable.
2. Remove the left instrument panel (I/P) lower insulator panel.
3. Disconnect the clutch pedal position (CPP) and the clutch start switch electrical connectors.
4. Disconnect the clutch master cylinder push rod (1) from the clutch pedal assembly.
5. From inside the engine compartment, remove the 2 clutch master cylinder retaining nuts.
