Montana V6-3.4L VIN E (2002)
1. Install the outlet heater hose.
2. Connect the outlet heater hose to the heater core.
3. Position the heater hose clamp using the J 38185.
4. Connect the outlet heater hose (3) to the outlet pipe (4).
5. Install the transmission fluid filler tube.
6. Connect the throttle and cruise control cables to the TBI mounting bracket.
7. Install the air cleaner cover and intake tube.
8. Connect the vacuum hose to the brake booster.
9. Install the left wiper arm linkage.
NOTE: Refer to Fastener Notice in Service Precautions.
10. Install the left wiper arm linkage nuts.
Tighten
Tighten the nuts to 5 N.m (44 lb in).
11. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID".
See: Application and ID/RPO Codes
