Montana V6-3.4L VIN E (2002)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet (With C60)
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the left wiper arm linkage nuts.
Reposition the left wiper arm linkage for access.
3. Disconnect the vacuum hose from the brake booster and reposition.
4. Remove the air cleaner cover and intake tube.
IMPORTANT: Disconnect the throttle and cruise control cables to prevent bending the cable housings.
5. Disconnect the throttle and cruise control cables from the TBI mounting bracket.
6. Remove the transmission fluid filler tube.
7. Disconnect the outlet heater hose (3) from the outlet pipe (4).
8. Reposition the heater hose clamp using the J 38185.
9. Disconnect the outlet heater hose from the heater core.
10. Remove the outlet heater hose.
INSTALLATION PROCEDURE
