Montana FWD V6-3.4L VIN E (2005)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Position (PNP) Switch Replacement
^
Tool Required
-
J 41545 Park/Neutral Switch Aligner
Removal Procedure
1. Apply the parking brake.
2. Block the wheels.
3. Shift the transmission into Neutral.
4. Remove the throttle body air inlet duct.
5. Use a flat-bladed tool in order to remove the automatic transaxle range selector cable from the cable lever.
6. Remove the electrical connectors.
7. Remove the automatic transaxle range selector lever.
8. Remove the PNP switch bolts.
9. Remove the PNP switch.
Installation Procedure
1. Verify that the shift shaft in the Neutral position.
