Torrent AWD V6-3.4L VIN F (2006)
5. Disconnect the pump motor electrical connector.
6. Remove the EBCM attaching screws.
7. Separate the EBCM from the BPMV by carefully pulling apart.
Installation Procedure
1. Clean the sealing surface of the BPMV, with denatured alcohol and a clean shop cloth.
2. Install the EBCM to the BPMV.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the EBCM-to-BPMV attaching screws. Tighten the bolts in a cross pattern.
^
Tighten the bolts to 3 Nm (27 inch lbs.).
4. Connect the pump motor electrical connector.
