Torrent AWD V6-3.4L VIN F (2006)
B. Attach the J 34686 to the crankshaft by hand, or tighten the attaching screws to 5 Nm (45 inch lbs.).
C. Turn the T-handle of the J 34686 in order to engage allow the collar to push the seal into the bore. Turn the handle until the collar is tight
against the engine block. Ensure that the seal is seated properly.
D. Loosen the T-handle until the handle comes to a stop.
E. Remove the attaching screws.
4. Install the engine flywheel.