Vibe L4-1.8L VIN L (2003)
-
The 3 bolts (1)
-
The sunroof actuator (4)
IMPORTANT: Remove the sunroof actuator with the motor in the fully closed position.
6. Remove the following components from the sunroof actuator (3):
-
The screw
-
The cam plate cover (2)
IMPORTANT: If the sunroof window and the sunroof actuator full close position are not matched, the sunroof window will not operate properly.
7. Turn the actuator drive gear (1) to align the point marks.
8. Install the cam plate cover (2) to the sunroof motor. Secure the cover with 1 screw.
9. Loosen the 4 sunroof housing drain hose clamps.
10. Remove the 4 sunroof housing drain hoses (2) from the sunroof housing (1).
