Vibe L4-1.8L VIN L (2003)
Important: If the sunroof window and the sunroof actuator full close position are not matched, the sunroof window will not operate
properly.
6. Remove the following components from the sunroof actuator (3):
*
The screw
*
The cam plate cover (2)
7. Turn the actuator drive gear (1) to align the point marks.
8. Install the cam plate cover (2) to the sunroof motor. Secure the cover with 1 screw.
9. Loosen the 4 sunroof housing drain hose clamps.
10. Remove the 4 sunroof housing drain hoses (2) from the sunroof housing (1).
11. Remove the following components from the vehicle:
*
The 2 plastic retainers (2) which secure each of the side rail roof panel insulators
*
The 2 side rail roof panel insulators (1)
12. Remove the dome lamp wiring harness from the 2 hangers on the sunroof housing.
