Vibe FWD L4-2.4L (2009)
1. Engage the three retainers (2), if equipped and install the antenna cable (3) to the headliner from the front of the vehicle.
2. Put the strips of tape (1) back into the positions shown in the illustration in order to secure the antenna cable (3) to the headliner.
Note: If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cable (3) to the headliner.
3. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair
).