911 Carrera (997) F6-3.6L (2006)
Brake Rotor/Disc: Removal and Replacement
Removing and Installing the Front Brake Disc
Removing and installing the front brake disc
Tools
Preliminary work
General warning notes
WARNING: Risk of accidents if brake pads and/or brake discs are not replaced in time.
^
Danger of injury and damage to vehicle if braking effect is impaired.
^
The brake pads must be replaced when the brake pad warning indicator lights up, but no later than when there is a residual pad
thickness of 2 mm.
ATTENTION: Increased risk of damage to brake discs when mounting/removing wheels.
^
The brake discs can be damaged.
^
Use assembly aid (assembly pins) in order to exclude any possibility of heavy contact of the wheel with the brake disc.
Removing front brake disc
WARNING: Risk of accidents if brake pads and/or brake discs are not replaced in time.
^
Danger of injury and damage to vehicle if braking effect is impaired.
^
The brake pads must be replaced when the brake pad warning indicator lights up, but no later than when there is a residual pad
thickness of 2 mm.
Note:
^
In order to gain better access for removal of the brake caliper it is beneficial to turn the wheels fully either to the right or the left.
1. Release retainer for plug of wear indicator on wheel carrier.
2. Disconnect the speed sensor on the ABS sensor.