911 Carrera (997) Crankshaft Repair - Engine Cylinder Block Assembly (Page 1325)
7. Replace seals for coolant ducts -Arrows-.
Note: It is advisable to get a second person to assist in inserting the gear carrier into crankcase half 1-3.
8. Insert gear carrier in crankcase half 1-3 with retaining device.
9. Screw in and tighten two additional screws for fastening the gear carrier to cylinder side 1-3, replace O-ring.-Arrows-. Tightening Torque: 22 ( ft.
lb.) Nm