911 Carrera (997) F6-3.6L (2006)
Gear carrier
Information
Watch out for bearing shells and oil spray jets that may fall out
5. Remove gear carrier half 1-3, possibly tapping it gently with a plastic hammer.
6. Place gear carrier half on a clean surface, remove seven crankshaft bearing shells and three oil spray jets for piston cooling.
Oil spray jets in gear carrier half 1-3
7. Lever out crankshaft with timing chain and place on a soft, clean surface.
8. Remove seven crankshaft bearing shells and oil spray jets for piston cooling from gearing carrier half 4-6. Unscrew gear carrier half from the
retaining device and place on a clean surface.
Installing crankshaft
Overview of connecting rod bearing position
Connecting rod bearing position in gear carrier
1. Fit gearing carrier half 4-6 on special tool retaining device 9607 using two M10 x 25 hexagon-head bolts.