911 Carrera (997) F6-3.6L (2006)
Note: Leave the centering mandrel in the eye of the connecting rod until the relevant piston (4-6) contacts the centering mandrel during assembly.
35. Align connecting rod using the centering mandrel 9608
36. Coat cylinder bore with new engine oil. Place piston 6 on cylinder bore 6 using the universal piston ring restraining strap, 75-125 mm NR.55.
37. Pay attention to direction of assembly: arrow on piston crown always points to flywheel side
ATTENTION: Incorrect and careless assembly of pistons.
^
Component damage (pistons, piston rings, cylinder line)
^
Assemble pistons carefully and gently.
^
Stop process immediately if there is increased resistance during assembly; eliminate the cause of the problem.
38. Hold the piston ring restraining strap firmly and press piston in one move into the cylinder bore using a plastic mandrel until the piston touches the
centering mandrel
39. Check installation position of connecting rod: In the installation position, the recesses of the twist lock in the connecting rod bearing point towards