911 Carrera (997) F6-3.6L (2006)
48. Push the piston pin circlip to its installation position by briefly and forcefully striking the palm of your hand against the star knob of the pressure
pin.
49. Using a mirror, check that the piston-pin circlip is seated correctly.
ATTENTION: Incorrect and careless assembly of pistons.
^
Component damage (pistons, piston rings, cylinder line)
^
Assemble pistons carefully and gently.
^
Stop process immediately if there is increased resistance during assembly; eliminate the cause of the problem.
50. Repeat steps 35- 49 carefully to assemble pistons 5 and. During this process, the crankshaft is fixed to the crankcase through bore U5 for cylinder
5 and through bore U4 to the belt pulley/vibration balancer. Convert the assembly tool 9602/ 1 as described below.
51. Push a spacer sleeve onto the assembly tube for the assembly of pistons pins and circlip on cylinder 5.
52. Fit the piston-pin circlip for cylinder 5 using a sleeve.