911 Carrera (997) F6-3.6L (2006)
Piston pin assembly bore
2. Place connecting rod in piston so that the twist lock of the connecting rod bearing shell is pointing downwards in the connecting rod (i.e. in the
direction of the arrow on the piston crown).
3. Coat piston pin with new engine oil and press it in manually or using the plunger special tool assembly tool 9500.
Pressing in piston pin
4. Insert new piston-pin circlip in the taper of the assembly aid 9603/1. Position the cylindrical part on the assembly tube of the special tool assembly
tool 9602/1.
Assembly sequence for piston-pin circlip
5. Press circlip into assembly tube using the assembly aid 9500/3.