911 Carrera (997) F6-3.6L (2006)
Guide for piston pin assembly
Information
^
Observe information on aligning piston ring gaps at all times.
34. Prepare pistons for installation in the same way as cylinder bank 1-3 (piston rings, oiling, piston ring tensioning clamp).
Information
^
Leave the centering mandrel in the eye of the connecting rod until the relevant piston (4-6) contacts the centering mandrel during assembly.
35. Align connecting rod using the centering mandrel 9608
Aligning connecting rod
36. Coat cylinder bore with new engine oil. Place piston 6 on cylinder bore 6 using the universal piston ring restraining strap, 75-125 mm NR.55.
Piston in cylinder bore
37. Pay attention to direction of assembly: arrow on piston crown always points to flywheel side