911 Carrera (997) F6-3.6L (2006)
2. Tighten fastening screw -arrow B-. Tightening torque: 50 Nm (37 ftlb.) ± 10%
3. Insert electric connector -2- into the seat-belt pretensioner -arrow A-.
4. Using a screwdriver, for example, push in the lock in -direction of arrow- until it engages.
5. By gently pulling on the belt -1-, check the winding action of the belt strap.
6. Position deflector -2- and seat belt on the inner side section and secure with the fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)
INFORMATION: Ensure that belt strap can run properly.
7. Secure seat belt and fitting.
7.1. Secure fastening screw -2-, washer -3-, seat belt with fitting -4- and spacer sleeve -5- on inner side member. Tightening torque: 50 Nm (37