911 Carrera (997) F6-3.6L (2006)
-> Tightening torque: 100 Nm (74 ftlb.)
8.2.
Install diagonal braces -1-.
Fit diagonal braces -1- and screw in and tighten screws -2-.
-> Tightening torque: 100 Nm (74 ftlb.)
Removing and installing brake caliper
9. Fit brake caliper.
Fit brake caliper -1- and screw in and tighten M12 screws -2- for brake caliper.
Always replace M12 screws -2- for brake caliper before fitting.
-> Tightening torque: 85 Nm (63 ftlb.)
10. Fit connecting link on anti-roll bar.
Fit connecting link -1- on anti-roll bar and screw on and tighten nut -2-.
-> Three-stage tightening procedure (1st stage: tighten to 50 Nm (37 ftlb.) 2nd stage: loosen by 90°. 3rd stage: tighten to 65 Nm (48 ftlb.).: 65
Nm (48 ftlb.)
Removing and installing connecting link and wheel carrier