911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
-
Display format
Using this menu item, you can code the display format.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Display format' in the Navigation coding function selection and confirm with the >> key.
-
Use the arrow keys to select as required and code with the F8 key.
-
Date
You can code the date using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control unit menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Date' in the Navigation coding function selection and confirm with the >> key.
-
Use the arrow keys to select as required and code with the F8 key.
-
Units
You can code the relevant units country-specifically using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection menu and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection menu and confirm with the >> key.
-
Select "Units" in the Navigation coding function selection menu and confirm with the >> key.
-
Select "the relevant units" from the menu item that is displayed and code them with the F8 key.
The following selection is available:
-
Metric, RoW (degree C, litre, km)
-
UK English (degree C, gallon, mph)
-
US English (degree F, gallon, mph)
-
Vehicle type vehicle
coding
The PCM2 GW corresponding to the vehicle type can be coded using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control unit menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Vehicle type vehicle coding' in the Coding menu and confirm with the >> key.
-
Select "911 (996)" in the menu and code with the F8 key.
-
Vehicle version vehicle
coding
The PCM2 GW corresponding to the vehicle version can be coded using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control unit menu and confirm with the >> key.
-
Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select 'Vehicle version' in the Navigation coding function selection and confirm with the >> key.
-
Select the relevant version 'Coupe, Cabrio, Targa' in the menu and code with the F8 key.
-
Right/left-hand drive
vehicle coding
The PCM2 GW corresponding to the vehicle model can be coded using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select "Right/left-hand drive vehicle coding" in the navigation coding function selection and confirm with the >> key.
-
Select "Right or left-hand drive" in the menu corresponding to the vehicle equipment and code with the F8 key.
-
Wheel size
The navigation module can be coded in accordance with the wheel size using this menu item.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the Navigation function selection and confirm with the >> key.
-
Select "Wheel size" in the Navigation coding function selection and confirm with the >> key.
-
Select "the wheel size" in the menu corresponding to the vehicle equipment and code with the F8 key.
-
Height/width in