911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Yaw Rate Sensor: Procedures
Rate-of-Turn Sensor - PSM 5.3
Removal
1. Remove passenger's seat.
2. Remove cover of rate-of-turn sensor.
3. Disconnect the plug on the rate-of-turn sensor with the ignition switched off, and pull off.
4. Undo rate-of-turn sensor at body (3 nuts).
Installation
Install in reverse order.
Removing and Installing Rate-of-turn Sensor - PSM 5.7
Removing And Installing Rate-of-turn Sensor - PSM 5.7