911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-306013.png)
Cap Of Intake-air Distributor
3. Fit cap by screwing in the two plastic screws -arrows-.
Sealing Ring For Throttle Body
4. Lightly grease and fit new seal for throttle body with Optimol MP3.
Screws For Throttle Body
5. Fit throttle body by screwing in and tightening the four Torx screws (M6 x 50) -arrows-. Tightening torque 7.5 ftlb..
Intake Distributor Gasket
6. Lightly grease and fit new moulded seals for intake-air distributor with Optimol MP3.
7. Clip solenoid valves into the brackets.
8. Clip ball sockets onto ball heads; if necessary, lightly grease with Optimol MP3 beforehand.
View Of Vacuum Units
9. Screw in fastening screws -arrows-.
10. Fasten cycle valve with tapping screw -arrow-.