911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-783002.png)
1. -A- Pull gateway control unit downwards on the plug side (unclip).
2. -B- Pull gateway control unit to the left out of the holder.
3. Release electric connector -A- and pull from the gateway control unit.
Installing gateway control unit
1. Push on electric plug until it is felt to engage on gateway control module.
2. Push in gateway control module into the holder -A- and clip in -A-.
3. If a new gateway control module has been installed, it must be coded on the vehicle.
Subsequent work
Subsequent work for gateway control unit
