911 Carrera Cabriolet (997) F6-3.6L (2007)
Power Seat Control Module: Service and Repair
Removing And Installing Control Unit For Memory Seat Adjustment
Preliminary work
Preliminary work for control unit for memory seat adjustment
Remove seat. Refer to Removing and installing front seat
Removing control unit for memory seat adjustment
WARNING: Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
NOTE: If the control unit must be replaced, first read out the values using the PIWIS Tester 9718.
1. Unscrew the two fastening screws -1-.