911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-610003.png)
Release and remove connectors for stage 1 and stage 2 of passenger's airbag unit.
2.2. Connector for seat-belt pretensioner, left -7- and right -8-
Release and remove connector on seat-belt pretensioner.
Remove rubber sleeves -9-.
2.3. Cut off the connector of the damaged wire harness, isolate it and secure it to the main wire harness with tie-wraps.
3. Using a small screwdriver, lever the seal out of the connector housing.
4. Cut and remove tie-wrap for fixing the wire harness to the connector housing.
5. Release connector housing with a small screwdriver, lift upwards and remove from connector.
