911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-614009.png)
14. Release contact of the damaged line using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -arrow a- and pull out of the contact strip.
15. Cut off the contacts of the damaged lines, isolate them and secure them to the main wire harness with tie-wraps.
INFORMATION: Allocation of lines - see wiring diagram.
16. Push new lines into the contact strip until the contacts are felt to engage.
17. Push connector guide onto the contact strip until it is felt to engage.
18. Insert connector into the connector housing -arrow A-.
19. Insert locking mechanism into the connector housing and press in -arrow B- until it is felt to engage.
