911 Carrera Cabriolet (997) F6-3.6L (2007)
3. Place pre-tensioned coil spring (with the tighter end of the spring) on the vibration damper.
4. Slide the bellows/additional spring assembly onto the piston rod.
5. Fit washer.
6. Position spring strut mount -2- onto the piston rod (with supporting mount -2-, compensating part -3- and spring support -4- assembly in correct
position).
Place the lug on the spring strut mount in the groove of the piston rod (twist lock of piston rod opposite the supporting mount).