911 Carrera S Cabriolet (997) F6-3.8L (2007)
Trunk / Liftgate Hinge: Service and Repair
559119 Removing And Installing Rear Lid Hinge
Preliminary work
1. Remove rear lid.
2. Disengage rear pneumatic spring at the lid.
NOTE: Only on the Coupe
3. Remove rear centre panel.
Removing rear lid hinge
NOTE: If the rear lid hinge fails to work properly, it can be replaced without having to remove the rear lid. In such cases, a second person is required to
hold the lid open during the repair process.
1. Unscrew fastening screws -1-.