911 Carrera S Cabriolet (997) F6-3.8L (2007)
Connecting rods 4-6
5.1.
Loosen and unscrew two external serration screws (M10 x 1.25 x 51) -1- on the connecting rod cap -2-.
Connecting rod cap screws
5.2.
Replace screws.
6. Remove pistons 4, 5 and 6 with connecting rods.
6.1.
Unscrew the grip handle on assembly aid 9783 and screw the bar -2- into a threaded bore on the connecting rod -1-. Press piston and
connecting rod down out of the cylinder bore.
Pressing out pistons and connecting rods for cylinder bank 4-6
6.2.
Repeat this step for pistons 5 and 6.
7. Remove connecting rods 1-3 -1- on the crankshaft.
7.1.
Unscrew connecting rod bolts -2- and remove connecting rod cap and connecting rod.