911 Carrera S Cabriolet (997) F6-3.8L (2007)
Cylinder head cover 4-6
2. Remove molded seal and clean it carefully using a clean, lint-free cloth.
3. Clean sealing faces on the cylinder head and cover. To do this, soak a clean, lint-free cloth in acetone or solvent naphtha and wipe off the surfaces.
3.1.
Allow components to dry off sufficiently.
Installation
Installing cylinder head cover
Notice
Dirt and contamination
^
Risk of damage to units or components
-
Protect components from dirt and contamination.
-
Clean or replace dirty components.
1. Fit seal -1- into the cylinder head cover.
Seal on cylinder head cover 1-3
Seal on cylinder head cover 4-6