911 Carrera S Cabriolet (997) F6-3.8L (2007)
Removing left front wheel.
Remove front left wheel housing liner.
Draining refrigerant.
Removing the condenser-fluid tank line
INFORMATION: When loosening or tightening the M8 refrigerant lines on the condenser, always counter with a 21-mm open-ended wrench.
1. Unscrew the fastening screw -1- for the line condenser and pull the line out of the condenser.
2. Pull the line out of the line holder.
3. Counter the fastening nuts -2- and open carefully.
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.