911 Turbo AWD (996) F6-3.6L Turbo (2001)
5.1. Align the rear window in the Z and Y directions.
6. Cleaning fields of vision
6.1. Adhesive which has oozed out must be removed immediately and the affected fields of vision must be cleaned using cleaning agent -H1-.
7. Plugging in rear window heater
7.1. Plug in the rear window heater.
8. Installing rear window wiper
8.1. Put on the spring washer and wiper arm. Screw wiper arm on with the fastening nut. Close the cap.
9. Installing rear wall lining
10. Installing left and right-hand C-pillar trim
10.1. Refer to Removing and installing trim of A, B and C-pillars
NOTE: The door windows must not be closed until after the curing time has elapsed.
11. Closing door windows
Overview of tools and materials
The following tools and materials are required for removal and installation of the rear window with 2-component adhesive: