porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2347 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2345
Page 5
background image

11. Fit the cowl panel cover and the battery cover.

Removing the inner EMERGENCY STOP switch

The necessary EMERGENCY STOP switch is installed depending on the additional equipment present:

EMERGENCY STOP switch in the centre console M 581.

EMERGENCY STOP switch - without centre console M 581 - in front of shift lever.

1. Carefully unclip the cover trims with the EMERGENCY STOP switch upwards with a suitable tool (e.g. screwdriver; plastic spatula).
2. Disconnect the 3-pin plug connection connected to the EMERGENCY STOP switch from the wiring harness by pushing and pulling. Insert the

wiring harness which is marked with a white identification tape - A - into the shaft in the centre console. Clip the standard cover - without
EMERGENCY STOP switch - into place.

Operating the main battery switch

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2347 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2345