911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Switch on ignition.
2. PIWIS Tester 9718 must be connected to the vehicle before starting it. Switch on the ignition and press >> to continue.
3. Select the vehicle type.
4. Select the PSM control unit and press >>.
5. Select the Actual values menu and press >>.
INFORMATION: In the straight-ahead position, the steering wheel must deviate by no more than ±2.0 degrees from the horizontal position (steering
centre position).
6. Turn wheels or steering wheel to straight-ahead position.
Select the Security code actual value, and press >>.
7. Write down security code. Press << to return to the PSM function selection.
8. Select the Calibration menu item, then enter the security code you wrote down, and press >>.
9. Confirm the security code by pressing F7.
10. Steering-angle sensor must be selected, then press >>.
11. Before calibrating, first turn the steering wheel from the straight-ahead position approx. 20 degrees to the left and 20 degrees to the right (past
straight-ahead position).
INFORMATION: In the straight-ahead position, the steering wheel must deviate by no more than ±2.0 degrees from the horizontal position (steering
centre position).
12. Turn wheels or steering wheel to straight-ahead position.
13. If the wheels are in the straight-ahead position, press >>.
14. Tester confirms Calibration successful.
15. Carry out a test drive and read out fault memory.