911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Turn Signal Lamp: Service and Repair
Removing and Installing Side Direction Indicator Light
Removing and installing side direction indicator light
Removing side direction indicator light
1. Insert a screwdriver through the opening in the wheel housing liner, press on the spring clamp at the direction indicator light and remove the
direction indicator light.
2. Release the electric plug connection and disconnect it from the direction indicator light.
3. Remove the direction indicator light.
4. Unscrew the bulb holder.
5. Remove the bulb from the holder.
Installing side direction indicator light
Observe instructions in Bulb table and installation instructions.