911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
CAUTION:
Risk of engine dropping down.
-
Danger of fatal injury and damage to property.
-
Secure the engine with a suitable mounting jack.
5. Support engine with a mounting jack.
6. Screw off M12 collar nuts on the two engine mountings.
7. Lower engine carefully.
8. Remove heat protection panels at the sides by screwing off the two speed nuts on each one.
9. Release cable plugs -1- on the electronic boost pressure adjusters on the turbochargers and pull them off.
10. Unscrew hexagon socket head bolt (M6 x 25) -Arrow- on the right electronic adjuster using a long socket-wrench insert (a/f 5) with a ball head.
11. Unscrew hexagon socket head bolts (M6 x 25) -Arrows- on the right electronic adjuster using a long socket-wrench insert (a/f 5) with a ball head.
12. Press hinge socket -1- off the ball joint and remove right electronic adjuster.