911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Installing clutch
1. Fit drive plate into the guide joint (needle-roller bearing) using a centering mandrel P 9102.
2. Mounting parts, toothed segment P 201b must be positioned on the studs. Then fit the pressure place and tighten fastening screws in several stages
and in diametrically opposite sequence. This prevents the pressure plate from becoming deformed.
Toothed segment
3. Centering mandrel P 9102 and mounting parts, toothed segment P 201b must be removed.
Subsequent work
1. Refit the transmission.
2. Install engine-transmission unit.