911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Undo front and rear fastening screws -1- from the convertible top support and the belt guide section -arrows A-, and pull rear window inner seal
-2- up and out -arrow B-.
2. Connect the PIWIS tester 9718 to the diagnostic socket
3. Switch on ignition.
INFORMATION:
-
The rear window lifter can only be removed when closed.
-
This closed state can only be achieved with the PIWIS tester when the convertible top is in service position.
4. Select the Convertible top menu item, then Drive links, and select theRaise rear door window (left or right) menu item in the command line which
then appears.
5. Loosen fastening nuts -1- on mounting pieces and remove side window -2- by pulling it up through the slot in the rear side panel. -arrows-.
Installing rear side window
INFORMATION: