Boxster (986) F6-2.5L (1998)
Vehicle speed
The value indicates the vehicle speed at the time the fault occurred.
Units
The following selection is available:
-
RoW/degree C/litre/km
-
UK 0 degree C/gal/mph
-
USA 0 degree F/gal/mph
Vehicle Type Vehicle Coding
The following selection is available:
-
Not coded
-
911(996)
-
911 Turbo (996)
-
Boxster (986)
-
Cayenne
-
987
-
997
Vehicle Version Vehicle Coding
The following selection is available:
-
Not coded
-
Coupe
-
Cabrio
-
Targa
Right/Left-Hand Drive Vehicle Coding
The following selection is available:
-
Right-hand drive
-
Left-hand drive
Vehicle Hand-Over
The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over
bar), the PCM2 must be activated with the Porsche System Tester II No. 9588.
1. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
2. Select the menu item 'Special functions' and press the >> key.
3. Select the menu item 'Vehicle hand-over' and press the >> key.
4. Follow the instructions of the Porsche System Tester II No. 9588.
Air Conditioning
The following versions can be coded:
-
Without air conditioning
-
With air conditioning
Coding Country-Specific Tuner Settings
1. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
2. Select 'Boxster (986)' in the Vehicle type menu and confirm with the >> key.
3. Select 'PCM' in the control modules selection and confirm with the >> key.
4. Select 'PCM2 GW' in the PCM2 function selection and confirm with the >> key.
5. Select 'Coding' in the PCM2 GW function selection and confirm with the >> key.
6. Select 'Country coding' in the PCM GW Coding function selection and confirm with the >> key.
7. Take the country-specific code as it appears in the table, enter it in the form and code with the F8 key.
Country-Specific Tuner Settings
The following country-specific tuner settings can be coded:
-
Europe
-
North America
-
South America
-
Australia