Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-1595006.png)
-
A ventilation period of at least 10 minutes must be observed between the cleaning of the glass section and the application of the primer.
-
No cleaning solution residues may remain on the body.
1. Removing adhesive on the hardtop body
1.1. When removing remaining adhesive -6- with the cutter -C- and the flashing knife -D- on the hardtop body, ensure that a surface coating of
adhesive remains -7-.
2. Cleaning and priming paint damage or newly built-up paint areas in the window aperture of the hardtop body
2.1. Clean new paint areas or damage to the top coat paint in the non-visible area of the glass section in the hardtop body with cleaning solution
-H1- and patch with primer -H2-.
Preparing the rear window for installation
INFORMATION:
-
The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.
-
Only with new rear windows.
-
A ventilation period of at least 10 minutes must be observed between the cleaning of the glass and the application of the primer. No cleaning
solution residues may remain on the body.
-
Only if the rear window is re-installed.
1. Removing adhesive from the rear window
