Boxster S (986) F6-3.2L (2001)
3.1. Apply 2-component bonding material with the adhesive gun -A- to the rear window along the cover section as a triangular bead measuring -X
= approx. 15 mm-.
INFORMATION: Two persons are needed to insert and adjust the rear window.
4. Inserting rear window into the hardtop body
4.1. Attach suction cups -B- to the rear window.
4.2. Insert the rear window at the top of the window aperture and lay it down carefully into the aperture.
5. Fixing rear window
5.1. Press the rear window fully upwards, pressing on the lower edge of the glass while doing so. Use adhesive tape to prevent the rear window
from slipping at the side and the top.
6. Cleaning fields of vision
6.1. Adhesive which has oozed out must be removed immediately and the affected fields of vision must be cleaned using cleaning agent -H1-.
7. Turning hardtop