Boxster S (987) F6-3.2L (2005)
Installation Location For Control Part Trim Panel
1. Unscrew front fastening screws -1- from the control part trim panel -2-.
Unscrewing Front Fastening Screw
2. Unscrew rear fastening screws -1- from the control part trim panel -2-.
Unscrewing The Rear Fastening Screw
3. Pull out control part trim panel -2- from the cushion in direction of arrow.
Pulling Out Control Part Trim Panel
4. Disconnect electric plug connection 3 and 4, unscrew fastening screws -5- from the tip switch -6- and take off the tip switch from the control part
trim panel -2-.