Boxster S (987) F6-3.4L (2008)
^
Danger of burns
--> Wear heat-resistant gloves!
2. Fit lid for the wheel bearing on the wheel bearing housing (4 M8 screws). --> Tightening torque: 37 Nm (27 ftlb.).
3. Press in wheel hub.
Position wheel bearing housing on wheel hub and press on wheel bearing inner race using a tubular piece VW 415 A.
Pressing in wheel hub
4. Fit brake cover plate on wheel carrier.
Screw in and tighten screws on brake cover plate.
--> Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
1. Install wheel bearing housing.
1.1.
Tighten tension bolt on the wheel hub (wheel hub/wheel bearing threaded joint). Use a new lock nut (M22 x 1.5). Tightening torque: 460 Nm
(340 ftlb.).