Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-309003.png)
9. Correct engine oil level. First fill in 0.5 liters of engine oil and check it again after starting the engine.
10. Start engine and check oil level.
11. Fit the underbody panel.
Markings on the oil dipstick (checking engine oil level)
^
The vehicle must stand horizontally.
^
The engine must be switched off and at operating temperature.
^
Before measuring, allow engine oil to flow back into the oil pan for approximately 3 minutes.
1. Pull out oil dipstick and wipe it off with a clean, lint-free cloth. Insert dipstick again fully, pull it out again, and read off the oil level. Correct
engine-oil level if necessary.
The oil level on the oil dipstick must never be below the MIN mark or above the MAX mark.
The difference quantity between the marks -1 and 2- is: 1.5 litre.
Note:
^
After changing the oil, the oil level must be checked using the dipstick.
^
The engine must have reached its operating temperature.
^
1 - max. marking
^
2 - min. marking
^
a - Area above cross-hatched area up to max. mark: no more oil must be added.
^
b - Oil level within cross-hatched area: additional engine oil can be added.
^
c - Area from min. mark to cross-hatched area: refill engine oil up to the cross-hatched area.
