Cayenne (9PA) V6-3.2L (2006)
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)
Note:
^
ATF must be changed when the engine/transmission is cold.
Note:
^
Only part of the total change quantity can be filled because of the test specifications stipulated for the ATF.
^
The rest must then be filled as described in the Checking ATF chapter.
3. Unscrew oil drain plug -B- and drain ATF.
4. Screw in oil drain plug -B- with new sealing ring. Tightening torque: 28 (21 ftlb.) Nm
Note:
^
Counter when loosening the ATF lines.
5. Undo ATF line screw connection on cooler side -arrow- at the thermostat.
6. Unscrew bolt -arrow- on ATF thermostat holder.