Cayenne (9PA) V6-3.2L (2006)
6. Unscrew the fastening screws -4- for the refrigerant lines -A-, -B- and for the coolant line -C-.
7. Unscrew the fastening screws -2- for the refrigerant lines, then seal the refrigerant lines, -A- (low pressure) and -B- (high pressure), and the
connections with plugs.
8. Pull out refrigerant lines -A- (low pressure) and -B- (high pressure) together. Unclip lines from the retaining clips.
Removing the rear vehicle floor suction line
ATTENTION:
Danger of injury from contact with the refrigerant.
-
Observe safety regulations when working with refrigerant.
1. Remove refrigerant by suction.
2. Unscrew the fastening screws -2- for the refrigerant lines, then unclip the refrigerant lines -A- (low pressure) and -B- (high pressure) from the