Cayenne Titanium (9PA) V8-4.5L (2006)
2. Select vehicle type using the cursor keys.
3. Using the >> key, move from the vehicle type to the list of control modules.
4. Select Level control and press the >>.
5. Select Actual values and press the >>.
6. Select the Actual values menu and display the safety code. Then read out the safety code and make note of it.
7. Select the menu Calibration, enter the safety code and carry out the Calibration function. Follow the instructions on the PIWIS tester.
8. Read out fault memory and erase if required.