Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Engine wire harness, generator
1
- Holder - see Valve cover
G - Cable clips
6. Turn the valve cover over and remove inner and outer seals. Clean sealing faces on valve cover and cylinder head.
Sealing faces on cylinder head
Information
Always replace seals.
Installing cylinder head cover (valve cover)
Installing cylinder head cover (valve cover) (up to October 2008)
Information
Plastic clips can be damaged once the wiring harness holder has been undone and must be checked to ensure they can be used again!
1. Clean sealing faces on valve cover and cylinder head thoroughly.
Cylinder head
Information
Always replace seals.