Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
/v8-4.5l_turbo/Page-1847019.png)
INFORMATION: Assembly instructions for seat belt height adjustment
- The operating knob of the seat belt height adjustment must not be pressed during this installation step.
- The seat belt must not be restricted by cable, lines, insulation, etc.
2. Connect actuator for seat belt height adjustment with adjustment fitting.
2.1. Insert guide bush -2- into guide pin -3- on adjustment fitting and lay trim panel -4- against B-pillar.
3. Check operation.
3.1. Check function of seat belt height adjustment by actuating it several times. The seat belt height adjuster must engage into place in one of 5
possible positions (including the uppermost).
3.2. The operating knob of the seat belt height adjustment must automatically return to the upper position after each operation.
3.3. The seat belt height adjuster must remain in the locked position when pulled abruptly.
3.4. The sash guide must level out on its own in a vertical position or in the direction in which it is worn.
Removing and Installing D-Pillar Trim
Removing And Installing D-pillar Trim
Removing D-pillar trim
