Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
10. Install transverse strut. Tighten the screws -arrows- (do not forget the centre screw). Tightening torque: 7.5 ftlb.
Installing (main) catalytic converter, cylinder bank 5 - 8
1. Push new exhaust clamp onto exhaust pipe.
2. Ensure sealing faces of exhaust system are clean.
3. Replace flange gasket and push over the studs of the main catalytic converter.
4. Put main catalytic converter in the installation position and fit new nuts and bolts.