porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2406 > < Procedures|Page 2404
Page 28
background image

16. Fasten ground point under the unit carrier -92-.

16.1. Connect ground straps and screw down fastening nut. Tightening torque: 9 Nm (6.5 ftlb.)

17. Push on connector for pedal sensor -85- until it is felt to engage.
18. Push on connector for stop light switch -84- until it is felt to engage.
19. Push on connectors of KESSY/PAS control unit -82 and 83- until they are felt to engage.
20. Push on connector of Gateway control unit -81- until it is felt to engage.
21. Push the plug connection together between main wire harness and wire harness for door, left and right -75 and 76-.

22. Clip in wire harness at door sill.

23. Fasten ground point under the passenger seat -70-.

23.1. Connect ground straps and screw down fastening nut. Tightening torque: 9 Nm (6.5 ftlb.)

24. Push on connectors for telephone control unit -66 to 69- until they are felt to engage.

Procedures|Page 2406 > < Procedures|Page 2404